James Hardie Fibre Cement Products

For all your James Hardie fibre cement product needs, Canterbury Timber & Building Supplies has you covered.

We also supply the full range of Scyon™ flooring and cladding products.  Scyon™ is an advanced lightweight cement composite with heavy-duty performance.

Canterbury Timber has a massive range of James Hardie and Scyon™ products available for almost all building applications.  We also have James Hardie and Scyon™ products on display at our Strathfield South store.

Some of the Hardie and Scyon™ products we supply are listed below.

Drop in to our store, email us or call for further information, pricing or to order James Hardie and Scyon™  products for same-day pick up or fast delivery.

James Hardie Fibre Cement Products

James Hardie HardiePanel is made from compressed fibre cement (CFC) and is available in a range of sheet sizes and thicknesses. HardiPanel is a structural flooring substrate. It is suitable for installation over timber or lightweight steel floor joists.

Hardies HardiPanel is ideal for use as an internal substrate for tiled wet-area floors or as an external substrate for tiled balconies, verandas and decks. It is suitable for both residential and commercial buildings. HardiPanel is a durable, stable, moisture-resistant alternative to particleboard and plywood substrates and a lightweight alternative to concrete. HardiePanel compressed sheet can also be used as formwork in a range of industrial and commercial applications such as bridges and roadworks. HardiPanel is also deemed non-combustible in accordance with the provisions of the Building Code of Australia and can be used for floors in bushfire-prone areas. HardiePanel compressed sheet is resistant to damage from termites, rot and fire.

Sheet Sizes

  • 15mm x 1800mm x 900mm
  • 15mm x 1800mm x 1200mm
  • 15mm x 2400mm x 900mm
  • 15mm x 2400mm x 1200mm
  • 15mm x 2700mm x 1200mm
  • 15mm x 3000mm x 900mm
  • 15mm x 3000mm x 1200mm
  • 18mm x 1500mm x 900mm
  • 18mm x 1500mm x 1200mm
  • 18mm x 1800mm x 900mm
  • 18mm x 1800mm x 1200mm
  • 18mm x 2100mm x 1200mm
  • 18mm x 2400mm x 900mm
  • 18mm x 2400mm x 1200mm
  • 18mm x 3000mm x 900mm
  • 18mm x 3000mm x 1200mm
  • 24mm x 2400mm x 1200mm

James Hardie Exotec is an express jointed facade panel system that is pre-sealed to accept a variety
of decorative finishes.

Sizes

  • 9mm – 1800mm x 900mm
  • 9mm – 1800mm x 1200mm
  • 9mm – 2100mm x 1200mm
  • 9mm – 2400mm x 900mm
  • 9mm – 2400mm x 1200mm
  • 9mm – 2700mm x 1200mm
  • 9mm – 3000mm x 1200mm
  • 12mm – 2400mm x 1200mm
  • 12mm – 3000mm x 1200mm
  • Other sizes available

James Hardie HardiePlank PrimeLine weatherboards are pre-primed, site-painted fibre cement weatherboards, available in a range of profiles from contemporary to traditional.

Hardies PrimeLine weatherboards are suitable for use as an external cladding in residential single and medium-density homes, including alterations and additions, where a traditional or contemporary weatherboard look is required. Ideal for full wrap or composite construction designs on either timber or light gauge steel framed homes. PrimeLine weatherboards are resistant to damage from termites, rot and fire. All HardiePlank PrimeLine weatherboards are 4200mm long and 9mm thick.

Sizes

  • HardiePlank PrimeLline Heritage 300mm
  • HardiePlank PrimeLine Newport 170mm
  • HardiePlank PrimeLine Summit 230mm
  • HardiePlank Primeline Chamfer 300mm

A tough, hard-wearing, low maintenance flat sheet that makes it easy to achieve a smooth, painted finish.

Sizes

  • 1800 X 900 X 4.5mm
  • 1800 X 1200 X 4.5mm
  • 2100 X 1200 X 4.5mm
  • 2400 X 450 X 4.5mm
  • 2400 X 600 X 4.5mm
  • 2400 X 900 X 4.5mm
  • 2400 X 1200 X 4.5mm
  • 2700 X 900 X 4.5mm
  • 2700 X 1200 X 4.5mm
  • 3000 X 900 X 4.5mm
  • 3000 X 1200 X 4.5mm
  • Other sizes available

An external weatherboard with different lapped profiles enabling a wide
range of looks from the contemporary to traditional.

Sizes

  • 230MM SMOOTH 4.2m
  • 230MM W/GRAIN 4.2m
  • 300MM SMOOTH 4.2m
  • 300MM W/GRAIN 4.2m
  • 205MM RUSTICATED 4.2m

Strong base sheets that are designed to be acrylic render coated with colour and texture, giving a beautiful rendered look without the need for masonry.

Sizes

  • 2440 X 1200 X 7.5mm
  • 2725 X 1200 X 7.5mm
  • 3000 X 1200 X 7.5mm
  • Other sizes available

A flat internal wall lining that provides an excellent foundation for a
durable, impact-resistant, professional finish that is resistant to moisture
damage*. The lining can be painted, wallpapered or tiled to create or
complement a wide range of design looks.

Sizes

  • 1800 X 1200 X 6mm
  • 2400 X 900 X 6mm
  • 2400 X 1200 X 6mm
  • 2700 X 1200 X 6mm
  • 3000 X 1200 X 6mm
  • 3600 X 1200 X 6mm
  • Other sizes available

Sizes

  • HARDIPLANK 230 AL EXT CNR
  • HARDIPLANK 230 AL INT CNR
  • HARDIPLANK 300 AL EXT CNR
  • HARDIPLANK 300 AL INT CNR
  • HARDIPLANK STUD CLIP
  • 7.5MM PVC STARTER STRIP 3m
  • HARDITEX PVC Z-FLASHING 3m
  • JH BASE COAT 15KG
  • JH TOP COAT 15KG
  • JH HYDREPOXY 501
  • HARDIBLADE DIAMOND 185mm

Scyon

James Hardies Scyon Axon cladding is made from an advanced fibre cement composite building material – Scyon.

Hardies Scyon Axon cladding is a vertically grooved cladding panel available in a range of sheet sizes and two sheet finishes – smooth or grained.

Scyon Axon is durable, thick (9mm), yet lightweight, easy to handle, work and install. Axon cladding is pre-primed and ready to paint on-site. Scyon sheets can be gun nailed and are easy to cut like timber. Scyon is resistant to damage from termites, rot and fire.

Scyon Axon cladding can be used in residential applications wherever a modern design is required, including external walls in composite construction, upper-storey and ground-level extensions, and internal feature walls.

Sheet Sizes

  • smooth finish, 133mm groove spacing
  • 2450mm x 1200mm
  • 2750mm x 1200mm
  • 3000mm x 1200mm
  • 3600mm x 1200mm
  • smooth finish, 400mm groove spacing
  • 2450mm x 1200mm
  • 2750mm x 1200mm
  • 3000mm x 1200mm
  • grained finish, 133mm groove spacing
  • 2450mm x 1200mm
  • 2750mm x 1200mm
  • 3000mm x 1200mm

James Hardie Scyon Linea weatherboard is a horizontal weatherboard with contemporary deep shadow lines.

Hardies Scyon Linea is the weatherboard that weathers well. Its made from an advanced fibre cement composite material – Scyon. All boards are 4200mm long and 16mm thick. Scyon Linea is available in two board widths – 150mm and 180mm.

A range of matched accessories – window trims, external box corners, external corner soakers and corner flashing are available making Scyon Linea weatherboard easy to install.

Scyon Linea weatherboard is suitable for use in residential applications wherever a contemporary design is required, including external walls in composite construction, upper story and ground level extensions and internal feature walls.

James Hardie Scyon Matrix cladding is an exterior cladding system with a modern, contemporary geometric look.

Hardies Scyon Matrix Cladding is made from an advanced lightweight fibre cement composite – Scyon. Matrix is available in a range of square and rectangular sheet sizes.

Scyon Matrix sheets are square edged. Expressed joints between each sheet add definition to their geometric appeal. Scyon Matrix sheets are sanded smooth and pre-primed, ready to be painted on site.

Matrix cladding is resistant to cracking, warping and swelling means it can be painted in both dark and light colours. Matrix cladding is suitable for timber frame or steel frame structures. Scyon Matrix cladding panels are sealed on all sides for durability and stability.

Scyon Matrix is resistant to damage from termites, rot and fire. Scyon Matrix cladding sheets can be gun nailed.

Sheet Sizes

  • 1190mm x 1190mm
  • 1790mm x 890mm
  • 2390mm x 590mm
  • 2990mm x 1190mm
  • – Scyon Cavity Trim
  • 2450mm x 70mm x 19mm

James Hardie Scyon Stria cladding is made from Scyon – an advanced fibre cement cement composite building material.

Hardies Scyon Stria cladding features a horizontal ship-lapped joint.

Scyon Stria is available in three unique profiles:

– The Scyon Stria standard profile is 14mm thick and 325mm wide. The square horizontal edge of Scyon Stria standard profile cladding gives the timeless charm and classic appeal of decorative rendered and raked masonry.

– The Scyon Stria splayed profile is 16mm thick and 255mm wide. Its splayed horizontal edge gives the timeless charm and classic look of traditional timber.

– The Scyon Stria wide profile is 14mm thick and 405mm wide. The square horizontal edge of Scyon Stria wide profile cladding gives the timeless charm and classic appeal of decorative rendered block-work.

Pre-primed and easy to install, Scyon Stria cladding is the fast way to achieve a timeless and classic look that endures.
Hardies Scyon Stria cladding can be used in residential applications wherever a timeless, classic and enduring look is required, including external walls in composite or full wrap construction, upper-storey and ground-level extensions and internal feature walls.

James Hardie Scyon Axent Trim is a thick and versatile trim made from Scyon – an advanced fibre cement composite material.

Hardies Scyon Axent Trim is the easy way to add finishing touches that maintain their appearance.

Hardies Scyon Axent Trim is ideal for edge treatment around windows, finishing touches to internal and external corners or as a design enhancer at butt joints.

Hardies Scyon Axent Trim is available in smooth or sanded finishes.

Sizes

  • smooth finish
  • 4200mm x 45mm x 19mm
  • 4200mm x 45mm x 38mm
  • sanded finish
  • 3640mm x 89mm x 19mm
  • 3640mm x 89mm x 38mm